1. YH welding machine cable, YH welding machine cable is suitable for secondary wiring and connection of welding clamps for welding machines with a voltage of no more than 200V AC to ground and a pulsating DC peak of 400V. It is a special cable suitable for secondary wiring and connection of welding clamps for welding machines, with a rated voltage of no more than 200V AC and a pulsating DC peak of 400V. The structure is a single-core cable made of multiple strands of soft wire. The conductive core is wrapped with heat-resistant polyester film insulation tape, and the outer layer is an insulation and sheath made of rubber as a protective layer.
2. Model Name
YH Natural rubber sheathed welding machine cable
YHF Chloroprene or other equivalent synthetic rubber elastomer sheathed welding machine cable
YH welding machine cable, YH welding machine cable, YH welding handle wire
3. Requirements for the use of welding machine cables:
(1) YH cable works under low voltage (high voltage is 200V) and high current conditions, and requires a certain degree of resistance.
(2) The long-term allowable operating temperature of the welding torch cable should not exceed 65°C. (3) The motor lead cable is frequently moved, twisted and applied, and requires flexibility and good bending performance. (4) It is easily scratched and rubbed by sharp steel components during application, so the cable insulation is required to have good mechanical properties such as tear resistance and wear resistance. (5) The operating environment conditions are complex, such as sunlight, boiling water, contact with muddy water, engine oil, acid and alkali liquids, etc., and a certain degree of weather resistance and oil and solvent resistance is required. (6) Sometimes it touches hot welding parts, and requires good heat deformation resistance. (7) It is frequently moved, and requires a small outer diameter and light weight. Since the electrical performance requirements for this type of cable are not high and the operating environment conditions are complex, it is not suitable to require the structure to meet various complex environmental factors. Pay attention to improving the operating conditions during use to prevent external damage.
