JEFR-6KV, JEFR-10KV Motor Lead Wire
Tensile Strength: 12
Application: Elongation
Nominal Cross-Section: 10-300 mm²
Maximum Wire Outer Diameter: 100 mm
Insulation Thickness: 5 mm
Sheath Thickness: 2 mm
Sheath Material: Special Rubber
Number of Cores: Wire Material
Application: Suitable for direct and permanent connection to motor windings leading out of the motor casing, or for connecting windings to the connecting studs on the motor casing. Our motor lead wires are supplied to major motor manufacturers and are also used as connecting cables for high-voltage switchgear.
Technical Requirements
1. Operating temperature: +90°C;
2. Rated voltage: 10,000V;
3. Conductor: 196/0.40 tinned copper wire, with a reference outer diameter of 22 mm.
4. The allowable bending radius during cable installation should be no less than four times the cable's outer diameter. Product Name
Model Name: JFEYH-10KV Copper Core EPR Insulated CSP Sheathed High-Voltage Motor Winding Lead Cable
Model Specifications
Model: Rated Voltage: 10000V, Number of Cores, Cross Section: JFEYH-10KV, 6-300mm²
Delivery Length: 100 meters/turn, measurement error within ±0.5%;
2. Any delivery length is permitted upon agreement between the parties.
