YKVFBG 19×1.0+2×1.0P+6FO+2×4 communication flat cable for mobile devices

2025-09-08 Leave a message

Mobile device communication flat cables are suitable for connecting electrical instruments or transmitting signals on mobile devices with an AC rated voltage of 450/750V or below. Steel wire is added on both sides of the flat cable for tensioning. Optical fiber can be added to the cable design for communication purposes as needed. These cables are flame-retardant, heat-resistant, cold-resistant, oil-proof, corrosion-resistant, flexible, wear-resistant, and tensile-resistant. They are widely used in industries such as metallurgy, electric power, petrochemicals, mining, shipbuilding, ports, and mobile device manufacturing. [Detailed Description]

YKVFBG 19×1.0+2×1.0P+6FO+2×4 Mobile Device Communication Flat Cable

I. Product Features and Applications

This mobile device communication flat cable is suitable for connecting electrical instruments or transmitting signals on mobile devices with an AC rated voltage of 450/750V or below. Steel wire is added to both sides of the flat cable for tensioning. Optical fiber can be added to the cable design for communication purposes as needed. The cable is flame-retardant, heat-resistant, cold-resistant, oil-proof, corrosion-resistant, flexible, wear-resistant, and tensile-resistant. It is widely used in industries such as metallurgy, power generation, petrochemicals, mining, shipbuilding, ports, and mobile device manufacturing. II. Product Standards: Communication flat cables for mobile devices comply with the company standard. Flame retardancy testing is conducted in accordance with GB12666.5-90.

III. Usage Characteristics

1. AC rated voltage: U0/U 0.45/0.75 kV; Maximum operating temperature: 105°C; Minimum ambient temperature: -40°C for fixed installation;

2. Cable installation temperature should not be lower than -25°C.

IV. Key Technical Specifications

1. The DC resistance of the finished cable conductor (R category) complies with GB3956;

2. The insulation resistance at 20°C is not less than 50 MΩ/km;

3. The finished cable must withstand an AC 50 Hz 2.5 kV/5 min voltage test without breakdown.